Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to ACCY or RUN.
- Hold the washer switch in the ON position for less than 1 second.
|
| • | The washer sprays the windshield and continues to spray for 2½ seconds
after the switch is released. |
| • | The wipers run at low speed and continue to run for approximately
6 seconds after the washer cycle is complete, then return to the park
position. |
|
Washers Inoperative .
|
2
|
- Turn the wiper switch to DELAY (pulse mode).
- Activate the delay time by turning the wiper switch.
|
| • | The wipers make one complete sweep, then pause for 0-25 seconds
before making the next sweep. |
| • | The pause time is adjusted by turning the wiper switch through
the delay range. |
|
Wipers Delay Mode Inoperative .
|
3
|
- Turn the wiper switch to DELAY.
- Hold the washer switch ON for 1-2 seconds.
|
| • | The washer sprays as long as the washer switch is held ON. The
wipers run at low speed during the spray period and continue for 2-4 sweeps
after the washer switch is released. |
| • | The wipers then return to pulse operation. |
|
|
4
| Turn
the wiper switch to LO.
| The wipers run continuously at low speed.
|
|
5
| Turn
the wiper switch to HI.
| The wipers run continuously at high speed.
|
|
6
| Turn
the wiper switch to OFF.
| The wipers return to the park position at low speed.
|
|
7
| Turn
the wiper switch to MIST, then release.
| The wipers make one complete sweep, then return to the
park position.
|
Wipers All Modes Inoperative .
|
