Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer Diagnostic System Check performed? | -- | Go to Step 2 | |
2 |
Do the wipers park? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
4 | Measure the voltage from connector C202 (vehicle side), terminal E9 to ground with a DMM. Is the measurement greater than 1 V? | 1 V | Go to Step 6 | Go to Step 5 |
5 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the replacement complete? | -- | -- | |
6 |
Is the measurement greater than 1 V? | 1 V | Go to Step 8 | Go to Step 7 |
7 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the replacement complete? | -- | -- | |
8 | Repair the short circuit to battery voltage in CKT 94. Is the repair complete? | -- | -- |
