Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 5 | Go to Step 3 |
3 | Check for an open in CKT 91. Is an open circuit present? | -- | Go to Step 4 | Go to Step 8 |
4 | Repair the open in CKT 91. Is the repair complete? | -- | -- | |
5 | Connect the test light from connector C1, terminal C to ground. Is the test light on? | -- | Go to Step 9 | Go to Step 6 |
6 | Check for an open in CKT 95. Is an open circuit present? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the open in CKT 95. Is the repair complete? | -- | -- | |
8 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the repair complete? | -- | -- | |
9 |
Is continuity present? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the open in CKT 196. Is the repair complete? | -- | -- | |
11 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Is the replacement complete? | -- | -- |
