GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Roof 🢒 Sunroof 🢒 Sunroof Actuator Cover Replacement - 2-3-4

Removal Procedure

    Object Number: 1468623 Size: SH

    Important: If the actuator cover is damaged, the cover can be removed and a new one installed without removing the window panels. Using a flat blade tool, disengage the lower portion of the clip and pull the cover off the window panel frame. If removing and installing the cover, follow the procedures below.

  1. Open the sunshade to the full rearward position.
  2. Remove the 2nd or 3rd sunroof window. Refer to Sunroof Window Replacement - Middle .
  3. Remove the rear sunroof window. Refer to Sunroof Window Replacement - Rear .
  4. Remove the sunroof window side actuator covers (1) from the left and right sides.

Installation Procedure

    Object Number: 1468623 Size: SH
  1. Install the rear sunroof window. Refer to Sunroof Window Replacement - Rear .
  2. Install the 2nd or 3rd sunroof window. Refer to Sunroof Window Replacement - Middle .
  3. Install the sunroof actuator cover (1) to the left and right sides, by aligning the cover with the holes in the window frame and press in place.
  4. Close the sunshade.
  5. Cycle the sunroof window to ensure proper operation and fit.