GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Roof 🢒 Sunroof 🢒 Sunroof Window Replacement - Middle

Removal Procedure
  1. Open the sunshade to the full rearward position.
  2. Cycle the sunroof window to the fully closed position.

    3. Object Number: 1468623 Size: SH

    Important: Do NOT fully remove actuator side covers (1). The sunroof window actuator cover conceals the window actuator screws. Use care when lifting up on the corners of the sunroof window actuator side covers to expose the screws.

  3. From inside the vehicle, gently pull back the actuator covers and remove the sunroof window screws from left and right sides.

    4. Object Number: 1470062 Size: SH

    Important: Use Care NOT to scratch the roof surface or the sunroof window.

  4. Lift the sunroof window (2 or 3) from the sunroof opening.
  5. Remove the actuator cover from the sunroof. Refer to Sunroof Actuator Cover Replacement - 2-3-4 .

Installation Procedure

    Object Number: 1470062 Size: SH
  1. Position the sunroof window (2 or 3) into the opening.

    2. Object Number: 1468623 Size: SH

    Important: Do NOT tighten the sunroof window actuator screws all way down before inspecting the alignment of the sunroof window. Maintain a 4.00 mm (0.16 inch) gap clearance around the sunroof window edges.

  2. From inside the vehicle, install the sunroof window actuator screws to the left and right sides. Do Not tighten the screws fully
  3. Adjust the sunroof window panel. Refer to Sunroof Window Height and Opening Fit Adjustment or Sunroof Window Alignment .

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the sunroof window actuator screws.

    5. Tighten
    Tighten the screws to 4 N·m (35 lb in).

  5. Install the sunroof window side actuator covers (1) to the left and right sides. Refer to Sunroof Actuator Cover Replacement - 2-3-4 .
  6. Close the sunshade.
  7. Cycle the sunroof window to ensure proper operation and fit.