GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Charging System Check ?

--

Go to Step 2

Go to Charging System Check

2

Check the battery hydrometer.

Is the green dot visible in the hydrometer?

--

Go to Step 7

Go to Step 3

3

Diagnose the battery hydrometer. Refer to Battery Hydrometer Displays Dark or Yellow Dot .

Is the charging system diagnosis complete?

--

Go to Step 4

--

4

Perform the battery load test. Refer to Battery Not Operating Properly .

Did the battery pass the load test?

--

Go to Step 6

Go to Step 5

5

Replace the battery. Refer to Battery Replacement .

Is the repair complete?

--

Go to Step 11

--

6

Check the generator. Refer to Generator Not Operating Properly .

Does the generator operate properly?

--

Go to Step 7

Go to Step 10

7

  1. Turn the ignition switch to OFF.
  2. Disconnect the powertrain control module (PCM) connector C1.
  3. Turn the ignition switch to ON.

Is the charge indicator still on?

--

Go to Step 8

Go to Step 9

8

Service the instrument cluster. Refer to Battery Charge Indicator Inoperative in Instrument Panel, Gauges and Console.

Is the repair complete?

--

Go to Step 11

--

9

  1. Check PCM connector C1 for poor terminal contact.
  2. If OK, replace the PCM. Refer to Powertrain Control Module Replacement/Programming in Engine Controls -- 3.8L.

Is the repair complete?

--

Go to Step 11

--

10

Replace the generator. Refer to Generator Replacement .

Is the repair complete?

--

Go to Step 11

--

11

  1. Make sure any components removed during diagnosis are installed in place and that all connectors are connected.
  2. Repeat the system check. Refer to Charging System Check .

Is the system check complete?

--

System OK

--