Notice: Turn OFF the ignition when connecting or disconnecting the battery cables, the battery charger or the jumper cables. Failure to do so may damage the PCM or other electronic components.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Disconnect the positive battery cable.
3. Remove the battery retainer bolt.
4. Remove the retainer.
5. Remove the battery.

1. Install the battery into the vehicle.
2. Install the battery retainer.
3. Install the battery retainer bolt.

Tighten
Tighten the bolt to 17 N·m 13 lb ft).

4. Connect the positive battery cable.

Tighten
Tighten the cable nut to 14 N·m 11 lb ft).

5. Connect the negative battery cable.

Tighten
Tighten the cable nut to 14 N·m 11 lb ft).