GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Preface 🢒 Cautions and Notices 🢒 Inflatable Restraint Roof Side Rail Module Replacement - Right Side

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling .

    2. Object Number: 1542986 Size: SH
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement.
  3. Remove the roof rail module electrical connector.
  4. Remove the roof rail module clip (1).
  5. Remove the 6 roof rail module screws (3).
  6. Remove the 3 roof rail module bolts (4).
  7. Remove the roof rail module (2).

Installation Procedure

    Object Number: 1542986 Size: SH
  1. Install the roof rail module (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the roof rail module bolts (4) in sequence shown.

    3. Tighten
    Tighten the roof rail module mounting bolts to 9.8 N·m (7 lb ft).

  3. Install the 6 roof rail module screws (3).
  4. Install the roof rail module clip (1).
  5. Install the roof rail module electrical connector.
  6. Install the headliner. Refer to Headlining Trim Panel Replacement.
  7. Enable the SIR system. Refer to SIR Disabling and Enabling .