Preliminary Procedures

1. Remove the instrument panel (I/P) carrier assembly. Refer to Instrument Panel Carrier Replacement.
2. Note the routing of the I/P wiring harness around the I/P tie bar to ensure the proper reinstallation.
3. Remove the nuts securing the air distribution duct to the I/P tie bar. Refer to Air Distributor Duct Replacement.
4. Remove the bolts securing the I/P tie bar to the brake pedal bracket.

1

I/P Tie Bar Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

I/P Tie Bar Bolt (Qty: 2)

Tighten
58 N·m (34 lb ft)

3

I/P Tie Bar Assembly

Procedure

With the aid of an assistant, remove the tie bar from the vehicle.

Preliminary Procedures

1. Remove the instrument panel (I/P) carrier assembly. Refer to Instrument Panel Carrier Replacement.
2. Note the routing of the I/P wiring harness around the I/P tie bar to aid in the reinstallation procedure.
3. Remove the nuts securing the air distribution duct to the I/P tie bar. Refer to Air Distributor Duct Replacement.
4. Remove the bolts securing the I/P tie bar to the brake pedal bracket.

1

I/P Tie Bar Bolts (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

I/P Tie Bar Bolts (Qty: 2)

Tighten
12 N·m (106 lb in)

3

I/P Tie Bar Assembly