Caution: Refer to Fastener Caution in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Remove the Instrument Panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement.

Note: Pull the tie bar far enough back for the air distribution duct to clear the opening.

2. Remove the I/P tie bar. Refer to Instrument Panel Tie Bar Replacement.

1

Nut, Distributor Air

Tighten
2.5 N·m (16 lb in)

2

Bolt, Distributor Air

Tighten
2.5 N·m (16 lb in)

3

Distributor, Air