GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 928746  Size: SH

    Important: The ignition switch must be in the OFF position when removing the instrument cluster.

  1. Remove the instrument panel (I/P) cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement .
  2. Remove the instrument cluster screws.
  3. Pull the instrument cluster towards you and disconnect the electrical connector.
  4. Remove the instrument cluster.

Installation Procedure


    Object Number: 928746  Size: SH
  1. Connect the electrical connector to the instrument cluster.
  2. Align the instrument cluster to the I/P.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the instrument cluster screws.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Install the I/P cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement.
  7. Refer to Control Module References for programming and setup information.