GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Grand Prix 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Window Channel Replacement

Removal Procedure

    Object Number: 315662 Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Remove the screw from the front door window run channel.
  4. Pull down to unclip the top edge of the window run channel.
  5. Remove the front door window run channel from the front door.

Installation Procedure

    Object Number: 315662 Size: SH
  1. Install the front window run channel to the front door.
  2. Slide the channel up to engage the clip at the top edge of the window run channel.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws to the front window run channel.

    4. Tighten
    Tighten the front window run channel screw to 2 N·m (18 lb in).

  4. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  5. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .