For 1990-2009 cars only
Removal Procedure
- Partially remove the upper portion of the rear door frame applique. Refer to Rear Door Frame Applique Replacement .
- Pull down and reposition the rear door window weatherstrip in order to gain access to the screws.
- Remove the screws from the window weatherstrip retainer.
- Remove the forward screw from the window weatherstrip retainer.
- Remove the window weatherstrip retainer from the rear door.
Installation Procedure
- Position the window weatherstrip retainer to the rear door .
- Push downwards on the door window weatherstrip to gain access to the screw holes.
- Install the window weatherstrip retainer screws.
- Install the rear door frame applique. Refer to Rear Door Frame Applique Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the rear door window weatherstrip retainer screws to 2 N·m
(18 lb in).
