Rear Compartment Lid Hinge Shim Bracket Replacement. Pontiac G6 2007

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Roof 🢒 Folding Top 🢒 Rear Compartment Lid Hinge Shim Bracket Replacement

Callout	Component Name
Preliminary Procedures Cycle the folding top until the rear compartment lid is in the full open rear position to gain access to the lid hinge bracket. Remove the upper part of the rear compartment lid hinge. Refer to Rear Compartment Lid Hinge Bracket Replacement - Lid Side .
1	Rear Compartment Lid Hinge Bracket Nut (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 10 N·m (89 lb in) Tip Mark the location of the part with a grease pencil before removing.
2	Rear Compartment Lid Hinge Bracket

Callout

Component Name

Cycle the folding top until the rear compartment lid is in the full open rear position to gain access to the lid hinge bracket.
Remove the upper part of the rear compartment lid hinge. Refer to Rear Compartment Lid Hinge Bracket Replacement - Lid Side .

Rear Compartment Lid Hinge Bracket Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Tip
Mark the location of the part with a grease pencil before removing.

Rear Compartment Lid Hinge Bracket