GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition Switch Lock Cylinder Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .
  2. Turn ignition switch to the run position.
  3. Push the ignition lock cylinder tab.

    4. Object Number: 1207714 Size: SH
  4. Remove the ignition lock cylinder.

Installation Procedure

    Object Number: 1207714 Size: SH

    Important: If you are installing a new lock cylinder, refer to Key and Lock Cylinder Coding.

  1. Install the ignition lock cylinder.
  2. Install the knee bolster. Refer to Knee Bolster Replacement .