Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the instrument panel left outer trim panel. Refer to Instrument Panel Outer Trim Cover Replacement .
2. Remove the left closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
3. Remove the data link connector.

1

Screws, Knee Bolster (Qty: 3)

Tighten
2 N·m (18 lb in)

2

Knee Bolster Assembly

3

Retaining Clip, Knee Bolster (Qty: 3)