GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
  2. Remove the knee bolster. Refer to Knee Bolster Replacement .
  3. Set the parking brake.
  4. Shift the vehicle into neutral, if equipped with automatic transmission.

  5. Object Number: 1475349  Size: SH

    Important: The I/P center trim bezel is painted and can be damaged. Pull on the bottom of the bezel to disengage the lower clips first or damage to the HVAC control module could occur.

  6. Remove the I/P center trim bezel.
  7. Remove the hazard switch. Refer to Hazard Warning Switch Replacement.

Installation Procedure

  1. Install the hazard switch. Refer to Hazard Warning Switch Replacement.

  2. Object Number: 1475349  Size: SH
  3. Install the I/P center trim bezel.
  4. Install the knee bolster. Refer to Knee Bolster Replacement .
  5. Install the I/P compartment. Refer to Instrument Panel Compartment Replacement .
  6. Shift into park.
  7. Release parking brake.