GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Suspension 🢒 Wheel Alignment 🢒 Front Camber Adjustment

    Object Number: 165158 Size: SH
  1. Reach around the tire, using the appropriate extension and socket.

    2. Object Number: 448946 Size: SH
  2. Loosen both strut to knuckle nuts just enough to allow for movement.

    3. Object Number: 866401 Size: SH
  3. If the strut has not been modified previously, perform the following steps before continuing with the wheel alignment:
    4. 3.1. Disconnect the strut from the knuckle. Refer to Strut Assembly Replacement .
    3.2. File the lower hole until the outer flange slot matches the inner flange slot.
    3.3. Connect the strut to the knuckle. Refer to Strut Assembly Replacement .

    Object Number: 165165 Size: SH
  4. Adjust the camber to specification by moving the top of the wheel in or out. Refer to Wheel Alignment Specifications .

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 448946 Size: SH
  5. Install the strut to knuckle nuts.

    6. Tighten
    Tighten the nuts to 120 N·m (89 lb ft).