Did you perform the Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check

1. Turn the ignition switch to the RUN position.
2. Fasten the driver's seat belt.

Does the fasten safety belt chime turn off?

--

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Does the fasten seat belt indicator remain on after 10-seconds?

--

Go to Fasten Safety Belt Indicator/Chime Always On

Go to Step 4

Replace the body control module (BCM). Refer to Body Control Module Replacement in Body Control System.

Did you complete the replacement?

--

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3