Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | Go to Diagnostic System Check | |
2 |
Does the fasten seat belt indicator turn off? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Disconnect the BCM connector C2 and the BCM connector C3. Is the fasten seat belt indicator still on? | -- | ||
4 | Inspect for and repair a short to battery voltage in circuit 237. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and repair a short? | -- | ||
5 | Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Did you complete the replacement? | -- | -- | |
6 | Connect a test lamp between the BCM connector C2 terminal B and connector C3 terminal C13. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | ||
7 | Test for and repair a short to ground in circuit 238. Refer to Circuit Testing or Wiring Repairs in Wiring Systems. Did you find and repair a short? | -- | ||
8 | Replace the seat belt switch. Did you complete the replacement? | -- | -- | |
9 | Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
