Tools Required

J 39400-A Halogen Leak Detector

1. Remove the auxiliary HVAC module assembly. Refer to Auxiliary HVAC Module Replacement .
2. Remove the auxiliary TXV. Refer to Auxiliary Air Conditioning Evaporator Thermal Expansion Valve Replacement .



3. Remove the auxiliary blower motor housing screws.
4. Remove the auxiliary blower motor housing from the HVAC module.
5. Remove the auxiliary HVAC module case screws.
6. Separate the auxiliary HVAC module case halves.
7. Remove the auxiliary evaporator core from the lower HVAC module case.

1. If replacing the auxiliary evaporator core add the specified amount of PAG oil directly to the auxiliary evaporator core. Refer to Refrigerant System Capacities .
2. Install the auxiliary evaporator core into the lower HVAC module case.
3. Assemble the auxiliary HVAC module case halves.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the auxiliary HVAC module case screws.

Tighten
Tighten the screws to 1.6 N·m (14 lb in).




5. Install the auxiliary blower motor housing to the HVAC module.
6. Install the auxiliary blower motor housing screws.

Tighten
Tighten the screws to 1.6 N·m (14 lb in).

7. Install the auxiliary TXV. Refer to Auxiliary Air Conditioning Evaporator Thermal Expansion Valve Replacement .
8. Install the auxiliary HVAC module assembly. Refer to Auxiliary HVAC Module Replacement .
9. Leak test the fittings of the component using J 39400-A .