1

1. Close the left front door.
2. Turn the ignition switch to the RUN position.
3. Unbuckle the driver's seat belt.

1. The fasten belts chime sounds for 4-8 seconds (slow-pulsed chime).
2. The FASTEN BELTS indicator illuminates for 70 seconds.

1. Fasten Safety Belt Chime Inoperative
2. Fasten Safety Belt Indicator/Chime Inoperative

2

1. Turn the ignition switch to the OFF position.
2. Buckle the driver's seat belt.
3. Turn the ignition switch to the RUN position.

3

1. Close the left front door.
2. Start the engine.
3. Turn the left or the right turn signal ON.
4. Drive the vehicle for approximately 1.2 km (3/4 mile).

The turn signal on chime sounds after you drive approximately 1.2 km (3/4 mile).

Turn Signal On Chime Inoperative

4

1. Apply the park brake.
2. Drive the vehicle for approximately 12 m (40 ft).

The park brake on chime sounds after driving approximately 12 m (40 ft).

Park Brake On Chime Inoperative

5

1. Turn the ignition switch to the OFF position.
2. Leave the key in the ignition switch.
3. Open the left front door.

The key in ignition chime sounds (medium-pulsed chime).

Key-In-Ignition Chime Inoperative

6

Remove the key from the ignition switch.

The key in ignition chime does not sound.

Key-In-Ignition Chime Always On

7

Turn the headlamp switch to the PARK or HEAD position.

The lamps on chime sounds (fast-pulsed chime).

Lights On Chime Inoperative

8

Turn the headlamp switch to the OFF position.

The lamps on chime does not sound.

Lamps On Chime Always On

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.