GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 1998 🢒 Cutlass 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Hinge Replacement

Removal Procedure
  1. Remove the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  2. Remove the rear window panel trim. Refer to Rear Window Trim Panel Replacement .
  3. Unload the torque rods.

    4. Object Number: 277628 Size: MH
  4. Remove the bolts (2).
  5. Remove the rear compartment lid hinge (1).
  6. Remove the torque rods.

Installation Procedure

    Object Number: 277628 Size: MH
  1. Install the rear compartment lid hinge (1).
  2. Install the torque rods.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts (2).

    4. Tighten
    Tighten the bolts to 11 N·m (97 lb in).

  4. Install the rear window panel trim. Refer to Rear Window Trim Panel Replacement .
  5. Install the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  6. Adjust the torque rod load. Refer to Rear Compartment Lid Hinge Torque Rod Replacement .