GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 797853  Size: SH
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
  2. Remove the door handle pull bracket screws.
  3. Remove the door handle pull bracket from the door.

Installation Procedure


    Object Number: 797853  Size: SH
  1. Position the door handle pull bracket to the door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the door handle pull bracket screws.
  4. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  5. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .