For 1990-2009 cars only
Removal Procedure
- Remove the sunroof module guides. Refer to Sunroof Guide Replacement .
- Remove the sunroof module sliders. Refer to Sunroof Sliding Block Guide Replacement .
- Remove the guides (1) from the left and right.
- Remove the drive cables (1) and sliders (2) from the guides.
- Remove the locker slider (1).
- Remove the sunroof window from the module.
Important: Place the sunroof module on a protective cover, face down.
Important : Mark the left and right sides of the guides in respect to the frame. This will assist in the alignment of the window to the module later.
| 5.1. | Rotate the lever forward, slide the locker slider forward. |
| 5.2. | Carefully remove the lever, using a suitable tool by inserting it between the track and the lever. |
The track is not serviceable, if damaged replace the sunroof window.
Installation Procedure
- Install the sunroof window to the module.
- Install the locker slider (1).
- Install the drive cables (1) and sliders (2) to the guides.
- Install the sunroof module guides (1) to the left and right.
- Install the sunroof module sliders. Refer to Sunroof Sliding Block Guide Replacement .
- Install the sunroof module guides. Refer to Sunroof Guide Replacement .
- Verify operations of the sunroof window.
| 2.1. | Rotate the lever forward, align the locker slider with the hole in the lever and slider forward. |
| 2.2. | Using a suitable tool, insert it between the track and the lever to lock it in place. |
The track is not serviceable, if damaged replace the sunroof window.
Important : Using the marks on the left and right sides of the guides to reinstall the window to the module for alignment.
