GM Service Manual Online
For 1990-2009 cars only

Console Shift Lever Bezel Replacement Oldsmobile, Buick

Removal Procedure

  1. Block the wheels to prevent the vehicle from moving.
  2. Remove the floor shift control boot from the floor console. Refer to Floor Shift Control Knob Replacement in Automatic Transmission.
  3. Adjust the shift lever fully rearward.
  4. Remove the console storage bin. Refer to Front Floor Console Compartment Replacement .

  5. Object Number: 1265404  Size: SH
  6. Starting at the rear of the bezel, lift the bezel to release the retaining clips.

  7. Object Number: 1274243  Size: SH
  8. Partialy remove the bezel from the console.
  9. Disconnect the in-line electrical connector to the traction control switch.
  10. Remove the bezel from the vehicle.
  11. If replacing the bezel , and if the vehicle is equipped with traction control, remove the traction control switch and electrical harness and retain for transfer. Refer to Electronic Traction Control Switch Replacement in Antilock Brake System.

Installation Procedure


    Object Number: 1274243  Size: SH
  1. If necessary, install the traction control switch and wiring harness to the bezel. Refer to Electronic Traction Control Switch Replacement in Antilock Brake System.
  2. Position the trim plate to the console.

  3. Object Number: 1265404  Size: SH
  4. Install the bezel to the console ensuring the retaining clips are fully seated.
  5. Install the floor shift control boot to the floor console. Refer to Floor Shift Control Knob Replacement in Automatic Transmission.
  6. Install the console storage bin. Refer to Front Floor Console Compartment Replacement .
  7. Position the shift lever in the PARK position.
  8. Remove the wheels blocks from the vehicle.

Console Shift Lever Bezel Replacement Chevrolet, GMC

For the Chevrolet and GMC the console shift lever bezel is not serviced as an individual piece. It must be replaced as part of the console assembly. Refer to Console Replacement.