GM Service Manual Online
For 1990-2009 cars only

Electronic Traction Control Switch Replacement GMC, Chevrolet

Removal Procedure

  1. Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 651279  Size: SH
  3. Disconnect the electrical connector from the traction control switch.
  4. Release the traction control switch locking tabs located behind the trim plate.
  5. Remove the traction control switch from the trim plate

Installation Procedure


    Object Number: 651279  Size: SH
  1. Position the traction control switch to the trim plate
  2. Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
  3. Connect the electrical connector to the traction control switch.
  4. Install the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement or Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages, and Console.

Electronic Traction Control Switch Replacement Oldsmobile, Buick

Removal Procedure

    Important: The console shift lever bezel must be removed prior to removing the traction control switch.

  1. Remove the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.

  2. Object Number: 1265379  Size: SH
  3. Disconnect the electrical connector (1) from the switch.

  4. Object Number: 1265389  Size: SH
  5. Use a flat-bladed tool to release the ring tabs (1).

  6. Object Number: 1265370  Size: SH
  7. Remove the retaining ring from the switch.

  8. Object Number: 1265375  Size: SH
  9. Remove the switch (1) from the trim plate.

Installation Procedure


    Object Number: 1265375  Size: SH
  1. Install the switch (1) to the trim plate.

  2. Object Number: 1265370  Size: SH
  3. Install the retaining ring to the switch, ensuring the ring tabs are fully seated.

  4. Object Number: 1265379  Size: SH
  5. Connect the electrical connector (1) to the switch.
  6. Install the shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.