- Connect the electrical connections to the IP lower trim pad assembly.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the right
side fasteners (1) in order to fasten the upper edge of
the IP lower trim pad assembly.
Tighten
Tighten the fasteners to 10 N·m (89 lb in).
- Install the left side
fasteners (1) in order to fasten the lower edge of the IP lower trim
pad assembly.
Tighten
Tighten the fasteners to 10 N·m (89 lb in).
- Install the left side fasteners (2) in order to fasten
the upper edge of the IP lower trim pad assembly.
Tighten
Tighten the fasteners to 10 N·m (89 lb in).
- Install the right side
fastener (1) in order to fasten the upper edge of the IP lower trim
pad assembly.
Tighten
Tighten the fastener to 2 N·m (18 lb in).
- Install the right side fasteners (2) in order to fasten
the lower edge of the IP lower trim pad assembly.
Tighten
Tighten the fasteners to 10 N·m (89 lb in).
- Install the left side
fastener (2) in order to fasten the upper edge of the IP lower trim
pad assembly.
Tighten
Tighten the fastener to 2 N·m (18 lb in)
- Install the right IP vent trim plate. Refer to
Instrument Panel Trim Panel Replacement - Right Side
.
- Install the IP cluster trim plate. Refer to
Instrument Panel Trim Panel Replacement - Left Side
.
- Install the left sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
.
- Install the right sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
.