GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Wave 🢒 Suspension 🢒 Tire Pressure Monitoring 🢒 Low Tire Pressure Indicator Module Replacement

Removal Procedure

    Object Number: 2065657 Size: SH
  1. Disconnect the hood release cable from the hood latch release handle.
  2. Remove the I/P undercover.
  3. Remove the driver side knee bolster.
  4. Disconnect the tire pressure module connector.
  5. Remove the tire pressure module retaining screws and the module (1).

Installation Procedure

    Object Number: 2065657 Size: SH
  1. Install the tire pressure module (1). Secure with retaining screws.
  2. Connect the tire pressure module connector.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the driver side knee bolster and tighten to 10 N·m (89 lb in).
  4. Install the I/P undercover.
  5. Connect the hood release cable to the hood latch release handle.