GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Seat Belt Buckle Replacement - Right Front

Removal Procedure

    Object Number: 743464 Size: SH
  1. Remove the front floor rear console. Refer to Rear Floor Console Replacement.
  2. Position the front seat (1) in a forward position in order to gain access to the seat belt switch electrical connector (2).
  3. Disconnect the seat belt switch electrical connector (2).

    4. Object Number: 830097 Size: SH
  4. Remove the following components from the front seat:
    5. • The 2 screws (1)
    • The inner adjuster finish cover (4)
    • The bolt (3)
    • The seat belt buckle (2)

Installation Procedure

    Object Number: 830097 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the seat belt buckle (2) to the front seat. Secure the buckle with the bolt (3).

    2. Tighten
    Tighten the front seat belt buckle bolt to 41 N·m (30 lb ft).

  2. Install the inner adjuster finish cover (4) to the front seat. Secure the cover with the 2 screws (1).

    3. Object Number: 743464 Size: SH
  3. Connect the seat belt switch electrical connector (2).
  4. Install the front floor rear console. Refer to Rear Floor Console Replacement.
  5. Return the front seat (1) to the upright position.