GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Vibe - FWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Side Rear Garnish Molding Replacement

Removal Procedure

    Object Number: 854615 Size: SH
  1. Remove the rear seat assembly. Refer to Rear Seat Replacement .
  2. Remove the bolt (2).
  3. Remove the rear seat hinge (3).
  4. Gently pry the rear body side lower garnish molding plastic retainers and remove the molding (1) from the vehicle.

Installation Procedure

    Object Number: 854615 Size: SH
  1. Install the rear body side lower garnish molding (1) to the vehicle. Ensure that the plastic retainers are fully seated.
  2. Install the rear seat hinge (3) to the rear body side lower garnish molding (1).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the bolt (2) to the rear seat hinge (3).

    4. Tighten
    Tighten the rear seat hinge bolt to 18 N·m (13 lb ft).

  4. Install the rear seat assembly. Refer to Rear Seat Replacement .