Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Hydraulic Brake Schematics Connector End View Reference: Component Connector End Views | |||
1 | Did you review the brake warning system circuit description and perform the necessary inspections? | Go to Step 2 | |
2 | With the ignition switch ON, observe the brake warning indicator and perform a brake warning system test by meeting each of the conditions described in the circuit description. Did the brake indicator illuminate for each condition? | Go to Step 3 | |
3 | Is the brake indicator completely inoperative in all conditions? | Go to Step 18 | Go to Step 4 |
4 | Did the brake indicator illuminate with the float manually held down? | Go to Step 5 | Go to Step 7 |
5 | Did the brake indicator illuminate with the parking brake applied? | Go to Step 6 | Go to Step 10 |
6 | Did the brake indicator illuminate with the ignition switch in START? | Go to Step 15 | |
7 |
Does the brake indicator illuminate? | Go to Step 8 | Go to Step 9 |
8 | Replace the brake fluid reservoir which contains the fluid level switch. Refer to Master Cylinder Reservoir Replacement . Did you complete the repair? | Go to Step 19 | -- |
9 | Test the ground circuit of the brake fluid level switch for an open. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 19 | Go to Step 17 |
10 |
Does the brake indicator illuminate? | Go to Step 11 | Go to Step 12 |
11 | Replace the park brake switch. Refer to Parking Brake Indicator Switch Replacement . Did you complete the repair? | Go to Step 19 | -- |
12 |
Does the brake indicator illuminate? | Go to Step 13 | Go to Step 17 |
13 | Test the park brake signal circuit for an open. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 19 | Go to Step 14 |
14 | Replace the DRL control module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Did you complete the repair? | Go to Step 19 | -- |
15 |
Is the circuit continuous? | Go to Step 17 | Go to Step 16 |
16 | Replace the ignition switch. Refer to Ignition and Start Switch Replacement . Did you complete the repair? | Go to Step 19 | -- |
17 | Test the control circuit of the brake indicator for an open. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 19 | Go to Step 18 |
18 | Replace the instrument cluster Refer to Instrument Cluster Replacement . Did you complete the replacement? | Go to Step 19 | -- |
19 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
