| Table 1: | Power Steering Control Module Scan Tool Data Parameters |
| Table 2: | Power Steering Control Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Engine ON | |||
Battery Voltage Signal | -- | Varies | The scan tool displays Volts. This is the current battery voltage at the power steering module. |
Engine RPM | -- | Varies | The scan tool displays RPM. This is the speed at which the engine is running. |
Ignition Voltage | -- | Varies | The scan tool displays Volts. This is the ignition voltage at the power steering module. |
Module Temperature | -- | Varies | The scan tool displays °C or °F. This is the temperature at the power steering module. |
Power Steering Motor Feedback | -- | Varies | The scan tool displays Amps. This is the actual amount of current at the power steering module. |
Power Steering Motor 1 Command | -- | Varies | The scan tool displays Amps. This is the demanded amount of current at the power steering module. |
Power Steering Motor 2 Command | -- | Varies | The scan tool displays Amps. This is the demanded amount of current at the power steering module. |
Power Steering Motor Rotation | -- | Varies | The scan tool display degrees. This is the motor rotation angle of the steering motor. |
PS Motor Phase U | -- | Varies | The scan tool displays volts. This is the terminal voltage at the motor phase U. |
PS Motor Phase V | -- | Varies | The scan tool displays volts. This is the terminal voltage at the motor phase V. |
PS Motor Phase W | -- | Varies | The scan tool displays volts. This is the terminal voltage at the motor phase W. |
PS Motor Supply Voltage | -- | Varies | The scan tool displays volts. This is the supply voltage at the motor. |
Steering Position Sensor | -- | Varies | The scan tool displays deg/s. This is the steering angle speed when the wheel is turned. |
Steering Shaft Torque | -- | Varies | The scan tool displays nm. This is the amount of torque when the wheel is turned. |
Torque Sensor Signal 1 | -- | Varies | The scan tool displays volts. This is the voltage at the torque sensor. 2.3 to 2.7 volts with steering wheel not turned (without load). 2.5 to 3.8 volts with steering wheel turned to the right with vehicle stopped. 1.2 to 2.5 volts with steering wheel turned to the left with vehicle stopped. |
Torque Sensor Signal 2 | -- | Varies | The scan tool displays volts. This is the voltage at the torque sensor. 2.3 to 2.7 volts with steering wheel not turned (without load). 1.2 to 2.5 volts with steering wheel turned to the right with vehicle stopped. 2.5 to 3.8 volts with steering wheel turned to the left with vehicle stopped. |
Torque Sensor 1 Ref. Position | -- | Varies | The scan tool displays volts. This is the torque sensor 1 value. |
Torque Sensor 2 Ref. Position | -- | Varies | The scan tool displays volts. This is the torque sensor 2 value. |
Vehicle Speed | -- | Varies | This displays km/h (mph). This is the current vehicle speed. |
Scan Tool Output Control | Description |
|---|---|
Steering Position/Torque Sensor Cal | This output control is used to calibrate the torque sensor. |
