GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Vibe - AWD 🢒 Engine 🢒 Engine Controls - 1.8L (LV6) 🢒 Rear Seat Cushion Replacement

Removal Procedure

    Object Number: 849882 Size: SH
  1. Remove the rear seat back trim panel. Refer to Rear Seat Back Cushion Trim Panel Replacement .
  2. Remove the 2 pivot bolts (2).
  3. Remove the 2 lower mounting bolts (4).
  4. Pull the rear seat cushion forward in order to remove the cushion from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 849882 Size: SH
  1. Slide the rear seat cushion into position. Ensure that the seat belt buckles are properly position through the cushion.
  2. Install the 2 lower mounting bolts (4)

    3. Tighten
    Tighten the lower mounting bolts (4) to 41 N·m (30 lb ft).

  3. Install the 2 pivot bolts (2).

    4. Tighten
    Tighten the pivot bolts (2) to 18 N·m (13 lb ft).

  4. Install the rear seat back trim panel. Refer to Rear Seat Back Cushion Trim Panel Replacement .