GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the coil spring. Refer to Coil Spring Replacement .

  2. Object Number: 1828728  Size: SH
  3. Remove the upper and lower rubber insulators from the coil spring.

Installation Procedure

    Important: 

       • Spray silicon lubricant on the insulators to aid in installation.
       • Make sure that part number identification tape located on the coil spring is oriented outboard of the vehicle and at the top of the spring.
       • Make sure to fully seat the top and bottom coil spring insulators to the spring.


    Object Number: 1828728  Size: SH
  1. Install the upper and lower rubber insulators to the coil spring.
  2. Install the coil spring. Refer to Coil Spring Replacement .