GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Sunfire 🢒 Body and Accessories 🢒 Theft Deterrent 🢒 Lock Housing Assembly - Assemble - Off Vehicle

    Object Number: 372981 Size: SH
  1. Install the ignition lock actuator assembly (4).
  2. Install the lock bolt assembly (3).
  3. Install the lock bolt support bracket (2).

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the 2 tapping screws (1).

    5. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).

  5. Install the steering column tilt head housing. Refer to Steering Column Tilt Head Housing - Assemble - Off Vehicle .
  6. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  7. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.