Tools Required

J 9886-01 Door Handle Clip Remover

1. Note the position of the door window regulator handle with the window in the full up position.
2. Place the door window regulator handle in the upward position.



3. Remove the spring clip by inserting J 9886-01 between the window regulator handle and the door window regulator handle bearing plate. Press down to remove the spring clip.
4. Remove the window regulator handle.
5. Remove the door window regulator handle bearing plate.

1. Position the window to the full up position.



2. Install the spring clip to the door window regulator handle.
3. Install the door window regulator handle bearing plate.
4. Position the door window regulator handle to the regulator.
5. Install the door window regulator handle, press in until fully seated.