GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Sunfire 🢒 Body and Accessories 🢒 Interior Trim 🢒 Center Pillar Upper Trim Panel Replacement

Removal Procedure

    Object Number: 280671 Size: SH
  1. Remove the front seat shoulder belt guide cover.
  2. Remove the front seat shoulder belt guide bolt.
  3. Pull the center pillar upper trim panel (1) outward at the roof in order to disengage the clips.
  4. Remove the center pillar trim panel from the vehicle.

Installation Procedure

    Object Number: 280671 Size: SH
  1. Position the center pillar trim pane (1) in the vehicle.
  2. Push the center pillar upper trim panel (1) in order to engage the clips.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front seat shoulder belt guide bolt.

    4. Tighten
    Tighten the shoulder belt guide bolt to 41 N·m (30 lb ft).

  4. Install the front seat shoulder belt guide cover.