For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the OFF position.
- Remove the key from the ignition switch.
- Remove the LH IP outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .
- Remove the AIR BAG Fuse from the LH IP wiring harness junction block.
- Remove the connector position assurance (CPA) from the inflatable restraint steering wheel module coil connector located under the instrument panel, left of the steering column.
- Disconnect the inflatable restraint steering wheel module coil connector.
- Remove the CPA from the inflatable restraint IP module inline connector located under the instrument panel, left of the steering column.
- Disconnect the inflatable restraint IP module inline connector.
Important: With the AIR BAG Fuse removed and the ignition switch in the RUN position, The AIR BAG warning lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.
