- Inspect the manual valve rod and retainer
for distortion or damage.
- Inspect the detent lever (703) for damage.
- Inspect the manual shaft (704) for the following
conditions:
| • | Bends or nicks on the shaft |
- Inspect the park lock actuator assembly
(705) for the following conditions:
| • | Damaged or broken retainer lugs |
| • | A damaged or broken spring |
| • | Cracked or damaged sleeve |
- Install the park pawl actuator rod (705)
onto the manual shaft (704).
- Install the manual shaft assembly (704)
into the case and engage the detent lever (703).
- Using a 5 mm (3/16 in) drift
pin and a hammer, install the roll pin (702).
- Align the groove of the manual shaft with
the retaining pin hole in the case.
- Using a hammer, tap the retaining pin (713) in place.
