CHILD SEAT INSTALLATION ON VEHICLES W/AUTO. SAFETY BELTS

Subject: INFANT/CHILD SEAT'S RESTRAINT ANCHOR PLATE/ BELT ASSEMBLY INSTALLATION AND SEAT BELT EXTENDERS

1987-1993 ALL MODELS

This bulletin cancels and replaces bulletins 90-10-1 and 85-2-2A.

Please refer to the following "Parts and Accessories" Bulletins that were mailed to all GM Dealers, November 2, 1992.

IB No. 92-179 IB No. 92-177

The infant/child seat installation and the seat belt extenders are to be provided to the customer at no charge. The parts are available at no cost to dealers through GMSPO by completing the GMSPO order form included in the above bulletins.

Labor time can be found in the respective Labor Time Guide to install the infant/child seat's restraint anchor plate/belt assembly.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.