Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Reach in between the bumper and front hood opening to disconnect the lamp socket electrical connectors.

1

Bulb, Park and Turn Signal Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

2

Bulb, Front Fog Lamp

Tip
Rotate the bulb socket counterclockwise from the lamp housing in order to remove.

3

Screws, Front Park and Turn Signal and Fog Lamp Assembly

Tighten
2 N·m (18 lb in)

4

Lamp Assembly, Front Park and Turn Signal and Fog

Tip
Pull the lamp housing forward in order to remove.