Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the instrument panel cluster (IPC) trim plate. Refer to Instrument Cluster Trim Panel Replacement .
2. Remove the driver knee bolster trim panel. Refer to Knee Bolster Replacement .
3. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
4. Remove the I/P inflatable restraint. Refer to Inflatable Restraint Instrument Panel Module Replacement .
5. Remove the right and left I/P outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side and Instrument Panel Outer Trim Cover Replacement - Left Side .
6. Remove the right and left windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
7. Remove the I/P extension trim plate. Refer to Instrument Panel Extension Trim Plate Replacement .

1

Screw, Instrument Panel Trim Pad (Qty: 17)

Tighten
2 N·m (18 lb in)

2

Trim Pad Assembly, Instrument Panel

Tip
Disconnect the electrical connectors.