GM Service Manual Online
For 1990-2009 cars only

The SIR scan tool data list contains all the restraint system related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, Data List, indicates the location of the parameter within the scan tool menu selections.

Use the SIR scan tool data list as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the Diagnostic System Check - Vehicle. Use the SIR Scan Tool Data List after the following is determined:

    • There is no published diagnostic trouble code (DTC) procedure nor published symptom procedure for the customer concern.
    • The DTC or symptom diagnostic procedure indicated by the diagnostic system check does not resolve the customer concern.

The typical data values are obtained from a properly operating vehicle, under the conditions specified in the second row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.

SIR Scan Tool Data List

Scan Tool Parameter

Data List

Units Displayed

Typical Data Value

Ignition ON/Engine OFF/Driver Seat Belt Buckled

8-Digit GM Part Number

Module 2 Information

8-digit number

16XXXXXX

Battery Voltage

Data

Volts

12 Volts

Calibration ID

Module 1 Information

4-digit number

Varies

Driver Seat Belt Status

Inputs

Buckled/Unbuckled

Buckled

Driver Side Impact Sensor ID

Module 1 Information

2-digit number

Varies

Front End Sensor ID

Module 1 Information

2-digit number

Varies

Julian Date of Build

Module 1 Information

3-digit number

Varies

Passenger Side Impact Sensor ID

Module 1 Information

2-digit number

Varies

Passenger Seat Belt Status

Inputs

Buckled/Unbuckled

Buckled

ROM ID

Module 1 Information

4-digit number

Varies

Year Module Built

Module 1 Information

4-digit number

Varies