GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Pursuit 🢒 Engine 🢒 Engine Mechanical - 2.4L 🢒 Windshield Washer Solvent Container Replacement

Removal Procedure

    Object Number: 815208 Size: SH
  1. Remove the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  2. Disconnect the washer pump hose from the pump.
  3. Drain the washer solvent from the washer solvent container and store in a suitable clean container.
  4. Disconnect the washer pump and level sensor switch electrical connectors.

    5. Object Number: 869670 Size: SH
  5. Remove the washer solvent container screws.
  6. Remove the washer solvent container from the right frame rail.

Installation Procedure

    Object Number: 869670 Size: SH
  1. Position the washer solvent container to the right frame rail.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the washer solvent container screws.

    3. Tighten
    Tighten the screws to 10 N·m (89 lb in).

  3. Connect the washer pump and level sensor switch electrical connectors.
  4. Connect the washer pump hose to the washer pump spout.
  5. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  6. Fill the washer solvent container with new washer solvent.
  7. Verify the washer pump operation and inspect for leaks.