REVISION-DIAGNOSTIC ROUTING ON SPECMO C/C QUICK CHECKERS

ALL VEHICLES WITH CRUISE CONTROL

The existing diagnostic test procedure listed on the reverse side of these "Quick Checkers" includes five troubleshooting steps. Each step provides a reliable indication, by the illumination of a light, of the electrical continuity of specific components in the cruise control system. A large number of GM Dealership service personnel are under the misunderstanding that these same five steps, also, verify the condition of the cruise vacuum system. This is not the case. To clear up this mistaken assumption, an essential addition has been incorporated in the existing test procedure.

A sixth step (refer to Figure 1) has been added. This step allows the technician to check the cruise system vacuum integrity from the accumulator tank through the vacuum servo.

To obtain the new diagnostic stickers, contact your zone office or divisional service contact representative. Place the sticker over the one presently on the "Quick Checker." If additional stickers are needed in the future, contact:

SPECMO ENTERPRISES 2344 N. Woodward Avenue Royal Oak, MI 48073 (313) 399-5645

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.