PSD Latch Test

Unlatched/Latched

The power sliding door control module (PSDM) actuates the power sliding door (PSD) latch assembly to either, unlatch the door when you select Unlatch, or, latch the door when you select Latch. The PSD must either be in the fully closed position, or in the ajar position, for the test to operate properly. Also, do not select either function, Unlatch or Latch, twice consecutively; each selection must be followed by selecting the opposite function. The latch should follow the scan tool command.

PSD Open/Close Test

Open/Close

The power sliding door module (PSDM) actuates the power sliding door motor/clutch assembly to either, open the power sliding door (PSD) when you select Open, or close the PSD when you select Close. Once the PSD has begun moving in the direction you have selected, do not attempt to stop it by selecting the opposite direction; always let the door finish moving in the direction you have selected before you try to operate it to the opposite direction.

Lock All Doors

Doors

The body control module (BCM) actuates the door lock relay when you select ON. All doors should lock.

Unlock All Doors

Doors

The BCM actuates the door unlock relay when you select ON. All doors should unlock.

Driver Door Unlock

Doors

The BCM actuates the driver door unlock relay when you select ON. The driver door should unlock.