Automatic Level Control Sensor Link Replacement Twist Axle

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the ELC sensor link from the tie rod ball stud. Remove the ELC sensor link from the sensor arm ball stud.

1. Install the link to the tie rod and the sensor arm.
2. Lower the vehicle.

Automatic Level Control Sensor Link Replacement IRS

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the ELC sensor link (1) from the ball studs on the sensor and control arm.

1. Position the ELC sensor link (1) to the ball studs on the sensor and control arm.
2. Press the ELC sensor link ends onto the ball studs until fully seated.
3. Lower the vehicle.