GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Montana 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Instrument Panel Electrical Center or Junction Block Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
  2. Remove the fuse block I/P end cover.

    3. Object Number: 318294 Size: SH
  3. Release the front retainer on the fuse block.

    4. Object Number: 318292 Size: SH
  4. Push the fuse block into the instrument panel.
  5. Remove the fuse block from the instrument panel.
  6. Remove the electrical connectors from the fuse block. Refer to Connector Repairs .

Installation Procedure
  1. Install the electrical connectors into the fuse block. Refer to Connector Repairs .

    2. Object Number: 318292 Size: SH
  2. Align the rear side of the fuse block with the instrument panel.
  3. Push the fuse block into the opening until secure.
  4. Install the I/P end cover.
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.