GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: The RAP fuse MUST be removed 10 minutes before this procedure to avoid damaging the new DVD player

  1. Remove the RAP fuse.
  2. Remove the bezel from the floor console. Refer to Floor Console Accessory Power Receptacle Replacement .

  3. Object Number: 787769  Size: SH
  4. Remove the mounting screws from the DVD Player.

  5. Object Number: 787767  Size: SH
  6. Slide the DVD player forward, and disconnect the electrical connectors from the DVD player.

Installation Procedure


    Object Number: 787767  Size: SH
  1. Connect the electrical connectors to the DVD player.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 787769  Size: SH
  3. Slide the DVD player inward and fasten with screws.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the bezel to the floor console. Refer to Floor Console Accessory Power Receptacle Replacement .
  6. Install the RAP fuse.
  7. Test the DVD player for proper operation.